Features:-
- With PIN Indexed Gas yokes for O2 & N2O.
- Diameter Indexed System connectors for O2, N2O & AIR
- Central Pipeline inlets.
- Hypoxic Safety guard, which maintains 25% oxygen flow.
- Nitrous Oxide auto fin absence of Oxygen gas.
- Gas failure alarm.
- Two drawer, retractable tray, Safety valve, APL, Airway Pressure Meter.
- ACGO for independent open circuit operation.
- Mechanical flow meter (5 tubes) with backlight on/off function
- Dual tube flow meter for O2, N2O & Single Tube for AIR
- 0.05-1ltr & 1.10-15ltrs/min
- Low Flow anaesthesia possible. O2 Flush of 25 to 75 lpm.
- Closed, Semi close and open circuit operation.
- Two vaporizer connectivity with interlocking function.
- AGSS Port Provided.
- Automated Pre check provided to check for leaks, compliance
- Navigating wheel for easy operation
- Integrated Circle absorber with optional heater to avoid water condensation in the patient circuit
- Canister capacity 1.5 liters
Built-in Ventilator
- Pneumatically driven, electronically controlled
- Modes of Ventilation:VCV,PCV, SIMV(V)+PS, SIMV(P)+PS, PSV with apnea backup, Manual and Bag-on-bypass.
- Electronic PEEP: Off, 4 to 30 cm H2O
- Manual Vent mode selector switch (One step operation)
- Tidal volume 40ml to 1500ml in VCV
- With Inspiratory and Expiratory flow sensors
- I:E Ratio : 4:1 to 1:8, Rate: 4 to 1000 bpm,
- Lithium Battery up to 360 minutes’ battery backup
Display:-
- With 8.4” Bright Color TFT display to set and monitor patient parameters (800 X 600 Pixels)
- Waveforms displayed: P-T, F-T, V-T
- LOOPS : V-P, V-F, F-P
- Alarms for Hi/Lo pressure, Hi/Lo Minute Volume,
- Hi/Lo Tidal Volume, Apnea, Continuous Airway pressure, Battery low, Hi/Lo FiO2 Concentration
- Monitors: Vti, Vte, MV, Freq, Peak, Plat, Pmean, FiO2, Resistance, Compliance.
- FiO2 Monitoring
Reviews
There are no reviews yet.